PMI explained: China's 49.3 and 52.0 both right in October 2026
China's official manufacturing PMI fell 0.8 points from September to 49.3 in October 2026, the NBS said on Oct. 31; the private RatingDog PMI read 52.0.
· 6 min read
Read in other languages한국어Español简体中文繁體中文日本語
Key takeaways (as of November 14, 2026)
- The Institute for Supply Management (ISM) manufacturing PMI rose to 55.5 in October 2026 from 54.5 in September, with all five of its component indices above 50.
- The PMI is a diffusion index that adds half of the "unchanged" responses to the share reporting improvement, so 50 means improving and deteriorating firms are evenly balanced; the Philadelphia Fed releases its November manufacturing index on Nov. 19, 2026.

In October, two gauges of the same Chinese manufacturing sector pointed in opposite directions. China's National Bureau of Statistics (NBS) reported on Oct. 31 that the official manufacturing purchasing managers' index (PMI) had fallen to 49.3, while the RatingDog index compiled by S&P Global came in at 52.0 on Nov. 2. One signals contraction, the other expansion. Neither number is wrong. A PMI does not measure output; it is a survey that counts the share of companies saying conditions improved, and the two indices poll different companies. November's manufacturing surveys start arriving shortly, beginning with the Philadelphia Fed's on Nov. 19. Knowing what the 50 line separates, and what it does not, makes these numbers much easier to read.
A PMI counts how many firms, not how much
A purchasing managers' index is built by putting the same questions to companies' purchasing executives every month. For items such as new orders, output and employment, respondents pick one of three answers: higher than last month, the same, or lower. The arithmetic is simple. Take the share answering "higher" and add half the share answering "the same." If everyone says nothing changed, the result is 50; if "higher" and "lower" are split evenly, it is also 50. That is why a reading above 50 is taken as expansion and one below 50 as contraction. The method has a clear limitation. A large company whose orders doubled and a small plant whose orders edged up each count as one vote. A PMI of 55 does not mean factories ran 55% harder; it means more companies leaned toward improvement than away from it. Because it asks about direction rather than size, the PMI comes out ahead of official production data, which is why markets look at it first.
| Index | Method | Threshold | October reading |
|---|---|---|---|
| ISM US Manufacturing PMI | Equal-weighted average of five component indices | 50 | 55.5 |
| S&P Global US Manufacturing PMI | New orders 30% · output 25% · employment 20% · delivery times 15% · stocks 10% | 50 | 54.9 |
| NBS China Manufacturing PMI | Diffusion index (official statistics) | 50 | 49.3 |
| Philadelphia Fed Manufacturing Index | Share reporting "increase" minus share reporting "decrease" | 0 | 20.9 |
All values are for October 2026, based on releases from ISM (Nov. 2), S&P Global (Nov. 2), China's NBS (Oct. 31) and the Philadelphia Fed (Oct. 15). Even among diffusion indices, the threshold is not always the same. The Philadelphia Fed index is centered on zero, so its 20.9 should not be set beside a PMI of 50. The survey's new orders index fell from September to 4.3 in October, barely above zero. Slightly more firms reported an increase than a decrease; that is not a sign that orders rose strongly.
Slower deliveries push the index up
One PMI component is read in reverse: supplier deliveries. The more respondents report that their suppliers' deliveries slowed, the further this index rises above 50, lifting the headline PMI with it. Usually that is read as a sign that orders are piling up and factories are busy, but congested logistics produce exactly the same number. Breaking ISM's October report down by component makes the point clear.
| ISM October components | October | September | Weight in PMI |
|---|---|---|---|
| New orders | 55.5 | 55.3 | 20% |
| Production | 59.0 | 56.7 | 20% |
| Employment | 52.4 | 52.7 | 20% |
| Supplier deliveries (higher = slower) | 59.1 | 59.0 | 20% |
| Inventories | 51.4 | 48.6 | 20% |
| Prices | 75.2 | 77.9 | Not included |
Based on ISM's Nov. 2, 2026 report; values are diffusion indices (%). Of the components behind October's US PMI of 55.5, the two highest were production and supplier deliveries. New orders were almost unchanged from September, and most of the gain over September came from inventories and production. A 55.5 driven by orders and a 55.5 driven by delivery times mean different things. The prices index, which asks about raw material costs, stood at 75.2; it is not part of the headline figure, but those watching inflation track it separately. S&P Global's US manufacturing PMI puts 30% of its weight on new orders and only 15% on delivery times. Same country, same month, yet ISM showed 55.5 and S&P Global 54.9: alongside different samples, this difference in weighting plays a part.

Release timing matters too. S&P Global publishes a flash estimate late each month, based on part of the responses, and the final figure early the following month. October's US manufacturing PMI was revised from a flash reading of 56.0 to a final 54.9. An interpretation made on flash day can change ten days later.
Where China's 49.3 and 52.0 diverge
Back to China's two numbers. Broken down by company size, the NBS index showed large enterprises at 50.2, still in expansion, while medium-sized firms at 48.4 and small firms at 47.5 pulled it down. The NBS cited factors including demand brought forward ahead of the National Day holiday. The RatingDog index was virtually unchanged, at 52.0 against 52.1 in September, and stayed above 50 for an eleventh straight month. Output grew at the fastest pace since April, but growth in export orders was the weakest in three months. The two indices survey different lists of companies with different industry mixes. Rather than asking which one is right, a more accurate read of Chinese factory conditions comes from checking whether they move in the same direction, and at which company size they part ways.
What the PMI says about Korea, and how to read PMI headlines
South Korea also has a manufacturing PMI compiled by S&P Global. The October reading fell to 51.3 from 53.9 in September, the slowest improvement since February. With the index above 50, conditions are still improving, but by a narrower margin than in September. For Korea's export-heavy manufacturing sector, the new orders components of the US and Chinese PMIs give an early view of demand overseas. When reading any PMI headline, three checks are enough. First, identify which organization compiles the index. As China shows, one country can have two. Second, check whether the figure is a flash estimate or a final reading. Third, rather than focusing on the distance from 50, look at how many months the index has stayed on the same side and which components moved the number.
| Date | Release | Threshold |
|---|---|---|
| Nov. 19 (8:30 a.m. ET) | Philadelphia Fed November Manufacturing Index | 0 |
| Late November | S&P Global November flash PMIs (US, eurozone and others) | 50 |
| Early December | ISM and S&P Global final November readings | 50 |
| Dec. 17 (8:30 a.m. ET) | Philadelphia Fed December Manufacturing Index | 0 |
Philadelphia Fed dates follow the bank's survey schedule; times are US Eastern. S&P Global's flash readings come out late each month and final readings early the next, so check S&P Global's release calendar for exact dates.
The highest component in the US PMI of 55.5 was supplier deliveries, a measure of slower lead times, which is a reminder that a strong number and a comfortable factory floor are not always the same thing. In the next PMI report, look for new orders and supplier deliveries alongside the headline figure. This article summarizes trends and is not investment advice.
Frequently asked questions
What does a PMI of 50 mean?
A PMI is a diffusion index calculated by adding half the share of "unchanged" responses to the share reporting improvement. A reading of 50 means the shares of companies reporting better and worse conditions are equal; above 50 indicates expansion and below 50 contraction. It does not measure by what percentage output grew.
Why do the ISM and S&P Global PMIs give different numbers?
The two organizations survey different companies and weight the components differently. ISM averages five components equally, while S&P Global weights new orders at 30%, output 25%, employment 20%, delivery times 15% and stocks 10%. For October 2026, the US manufacturing PMI was 55.5 from ISM and 54.9 from S&P Global.
When are the November 2026 PMIs released?
The Philadelphia Fed's November manufacturing index is due on Nov. 19 at 8:30 a.m. US Eastern time. S&P Global's November flash PMIs for the US, the eurozone and others come out in late November, and the final ISM and S&P Global readings follow in early December.
Sources
- ISM, Manufacturing PMI at 55.5%; October 2026 ISM Manufacturing PMI Report (Nov. 2, 2026) — prnewswire.com
- National Bureau of Statistics of China, Purchasing Managers' Index for October 2026 (Oct. 31, 2026) — stats.gov.cn
- S&P Global Market Intelligence, US manufacturing PMI holds close to highest since 2022 as price pressures build (Nov. 2, 2026) — spglobal.com
- Federal Reserve Bank of Philadelphia, Manufacturing Business Outlook Survey October 2026 (Oct. 15, 2026) — philadelphiafed.org
- Federal Reserve Bank of Philadelphia, Manufacturing Business Outlook Survey release schedule (Nov. 2026) — philadelphiafed.org
- FXStreet, South Korea S&P Global Manufacturing PMI fell from previous 53.9 to 51.3 in October (Nov. 2, 2026) — fxstreet.com




